Injection-molded plastic components and assemblies, including BIO materials, toolmaking, finishing and assembly.
3P Plastic GmbH
Stassfurt / Förderstedt district (Headquarters / Production)New on Amplifa
About 3P Plastic
3P Plastic GmbH is a privately owned plastics processing company based in Stassfurt, in the Förderstedt district of Saxony-Anhalt. The company manufactures custom injection-molded parts and assemblies on more than 20 injection molding machines with clamping forces between 20 and 700 tons in 1K and 2K configurations, fully digitized, energy-efficient and equipped with removal robots. The process spectrum includes multi-component injection molding, micro injection molding, hybrid technologies as well as transparent materials and BIO-based plastics made from 100 % renewable raw materials. In addition to injection molding production, 3P offers research and development, in-house toolmaking, plastic welding processes (ultrasonic, hot plate, vibration), assembly and surface finishing such as printing, painting, vapor coating, hard coat coating, metallization and REACH-compliant chrome plating. Customers come from the automotive industry, high-end consumer electronics, building technology and furniture components. Production follows the principle of lean production with fully computer-supported logistics including EDI, JIT and FiFo processes.
- Site
- Stassfurt / Förderstedt district
- Processes
- Injection molding production (1K and 2K), Multi-component injection molding (2K), Micro injection molding, Hybrid technologies, Toolmaking (in-house, injection molds), Research and development, Assembly (fully automatic, semi-automatic or manual), Ultrasonic welding
- Materials
- BIO-based plastics (100 % renewable raw materials), Transparent materials (plastics), BIO-based plastics, Transparent materials, Thermoplastics, Polymer (3D printing)
- Certificates
- In-house laboratory with 3D scanners, Internal audits / integrated management system, End-to-end quality planning
- Founded
- 2002
- Industries
- Automotive, Electronics (high-end consumer electronics), Building technology, Furniture components
- 01
Research and development
- 02
Toolmaking (in-house, with partners in Eastern Europe and China)
- 03
Injection molding production (1K/2K, micro injection molding, hybrid
- 04
Plastic welding (ultrasonic, hot plate, vibration)
- 05
Assembly (fully automatic, semi-automatic or manual)
- 06
Surface finishing (printing, painting, vapor coating, hard coat, metallization,
- 07
Quality inspection (in-house laboratory, 3D scanners)
- 08
Logistics (EDI, JIT, FiFo)
Materials and Processes
BIO-based plastics
Consist of 100 % renewable raw materials and have been used in series production as an ecological alternative since 2016.
Transparent materials
Processed for optically demanding injection molding applications.
Thermoplastics
Classic material for 1K and 2K injection molding production.
Polymer (3D printing)
In the PolyBodyAM project, electrochemically active polymer fill bodies are being developed using 3D printing processes.
Locations
Stassfurt / Förderstedt district
DEHeadquarters / Production
- Materials
- BIO-based plastics, thermoplastics, transparent materials
- More than 20 injection molding machines (1K and 2K) with clamping forces from 20 to 700 tons
- Removal robots
- In-house toolmaking
- Assembly department
- In-house laboratory with 3D scanners
Components and Products
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Injection molding production (1K and 2K)Plastics | – | – | – | – | Thermoplastics (virtual), BIO-based plastics |
| Multi-component injection molding (2K)Plastics | – | – | – | – | – |
| Micro injection moldingPlastics | – | – | – | – | – |
| Hybrid technologiesPlastics | – | – | – | – | – |
| Toolmaking (in-house, injection molds)Engineering | – | – | – | – | – |
| Research and developmentEngineering | – | – | – | – | – |
| Assembly (fully automatic, semi-automatic or manual)Assembly | – | – | – | – | – |
| Ultrasonic weldingJoining | – | – | – | – | Plastic |
| Hot plate weldingJoining | – | – | – | – | Plastic |
| Vibration weldingJoining | – | – | – | – | Plastic |
| Printing (surface finishing)Surface | – | – | – | – | Plastic |
| PaintingSurface | – | – | – | – | Plastic |
| Vapor coatingSurface | – | – | – | – | Plastic |
| Hard coat coatingSurface | – | – | – | – | Plastic |
| MetallizationSurface | – | – | – | – | Plastic |
| Chrome plating (REACH compliant)Surface | – | – | – | – | Plastic |
| Quality inspection with 3D scanners (in-house laboratory)Testing | – | – | – | – | – |
| 3D printing processes (PolyBodyAM project, electrochemically active polymer fill bodies)Additive | – | – | – | – | Polymer |
1 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Injection molding machines (1K and 2K, with removal robots) | – | über 20 | Clamping forces between 20 and 700 tons | – | Stassfurt / Förderstedt district |
Additional services
Quality
3P Plastic GmbH works according to the quality claim 100/0: 100 % customer satisfaction with 0 % complaints. Quality is planned throughout rather than sorted; modern technologies such as 3D scanners are used in the in-house laboratory, and regular internal audits ensure stable, reproducible processes.
| Evidence | Stassfurt / Förderstedt district |
|---|---|
| In-house laboratory with 3D scanners | |
| Internal audits / integrated management system | |
| End-to-end quality planning |
History
- 2002
Founding of 3P Plastic GmbH
- 2015
BIO plastic material innovation awarded promotional prizes
- 2016
Processing of the BIO material in products from February