Contract manufacturing in laser cutting, waterjet cutting, laser welding and sheet metal working for metals and almost all materials.
Cut Center AG
Hünenberg (CH)New on Amplifa
About Cut Center
Cut Center AG is a contract manufacturing company based in Hünenberg in Central Switzerland and has been active in laser cutting and waterjet cutting for over 20 years. The company cuts a broad spectrum of materials: steel (up to 20 mm), stainless steel (up to 15 mm) and aluminium (up to 8 mm) by CO2 laser cutting on a Trumpf system; by abrasive waterjet cutting all metals such as copper and brass as well as hard materials such as stone, ceramic, glass, wood and composites; by pure-waterjet cutting soft and heat-sensitive materials such as rubber, plastic and foam. The service portfolio additionally includes hand-guided laser welding with fiber laser, conventional welding (stud welding, spot welding, shielded gas, TIG, MIG/MAG), sheet bending, mechanical machining as well as surface finishing including powder coating, anodising and galvanic coatings. According to the company, it supplies finished parts and assemblies from raw cut to coated component, now also for series production. The quality management system is certified to ISO 9001:2015.
- Site
- Hünenberg
- Processes
- Laser cutting (CO2 laser), Abrasive waterjet cutting, Pure-waterjet cutting, Laser welding (hand-guided, fiber laser), Sheet bending, Mechanical machining (countersinking, thread cutting, drilling, milling), Surface finishing, Powder coating
- Materials
- Steel, Stainless steel, Aluminium, Copper, Brass, Plastic, Rubber, Foam
- Certificates
- ISO 9001, ISO 9001 (IMC GmbH, no. 6331-0449-QM), ISO 9001 (ATTESTA Swiss Certification Company AG, no. 226-07-015.Q)
- Founded
- N/A
- Employees
- N/A
- Industries
- Contract manufacturing for metal and sheet metal construction, mechanical, Target industries not specified
- 01
Consulting and CAD/programming
- 02
Laser cutting or waterjet cutting (abrasive/pure water)
- 03
Welding and sheet bending
- 04
Mechanical machining
- 05
Surface finishing
- 06
Assembly/completion and delivery
Materials & Processes
Laser cutting (CO2 laser, Trumpf)
High-precision, burr-free cutting of steel up to 20 mm, stainless steel up to 15 mm and aluminium up to 8 mm, including complex shapes.
Abrasive waterjet cutting
Cuts hard materials such as metal, stone, ceramic, glass, wood and composites without thermal distortion or structural change.
Pure-waterjet cutting
For soft materials such as rubber, plastic, foam and heat-sensitive materials without abrasive.
Laser welding (hand-guided, fiber laser)
Welding of thick, thin and reflective metals with minimal heat input, up to four times faster than conventional TIG welding.
Conventional welding
Stud welding, spot welding, shielded gas, TIG and MIG/MAG for a wide variety of metals.
Sheet bending
Precise bent parts on high-performance press brakes.
Surface finishing
Powder coating, anodising and galvanic coatings (nickel, zinc, chromium) for finished assemblies.
Locations
Hünenberg
CHHeadquarters and production
- Lot size
- Single parts through series production
- Materials
- Steel, stainless steel, aluminium, copper, brass, plastic, rubber, foam, glass, stone, ceramic, wood,
- CO2 laser cutting machine (Trumpf)
- Waterjet cutting system (abrasive and pure water)
- Fiber laser welding system (hand-guided)
- Press brake
Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Laser cutting (CO2 laser)Machining | – | – | – | Series production possible | Steel, Stainless steel, Aluminium |
| Abrasive waterjet cuttingMachining | – | – | – | Series production possible | Metal, Plastic, Stone, Wood, Composites, Ceramic, Glass, Steel, Stainless steel, Aluminium, Copper, Brass |
| Pure-waterjet cuttingMachining | – | – | – | – | Rubber, Plastic, Heat-sensitive materials |
| Laser welding (hand-guided, fiber laser)Joining | – | – | – | – | Various metals (thick, thin and reflective, Dissimilar metals of different thicknesses |
| Sheet bendingForming | – | – | – | – | Aluminium, Sheet metal |
| Mechanical machining (countersinking, thread cutting, drilling, milling)Machining | – | – | – | – | Metals |
| Surface finishingSurface | – | – | – | – | Metals |
| Powder coatingSurface | – | – | – | – | Coated surfaces |
| AnodisingSurface | – | – | – | – | Metals (aluminium) |
| Galvanic coating (nickel, zinc, chromium)Surface | – | – | – | – | Metals |
| Stud weldingJoining | – | – | – | – | A wide variety of metals |
| Spot weldingJoining | – | – | – | – | A wide variety of metals |
| Shielded gas weldingJoining | – | – | – | – | A wide variety of metals |
| TIG weldingJoining | – | – | – | – | A wide variety of metals |
| MIG/MAG weldingJoining | – | – | – | – | A wide variety of metals |
| Sheet metal workingForming | – | – | – | – | Sheet metal, Metal, Plastic, Rubber, Foam |
4 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| CO2 laser cutting machine | Trumpf | – | – | – | Hünenberg |
| Press brake | – | – | – | – | Hünenberg |
| Waterjet cutting system (abrasive and pure water) | – | – | – | – | Hünenberg |
| Fiber laser welding system (hand-guided) | – | – | – | – | Hünenberg |
Additional services
Reference customers
Quality
Cut Center AG is certified to ISO 9001:2015; processes are continuously reviewed, optimised and aligned with customer requirements.
| Evidence | Hünenberg |
|---|---|
| ISO 9001 (IMC GmbH, no. 6331-0449-QM) | |
| ISO 9001 (ATTESTA Swiss Certification Company AG, no. 226-07-015.Q) |
History
- Seit über
Years of experience in laser cutting and waterjet cutting
- 2023-04-12
Start of validity of the IMC certificate
- 2026-04-11
End of validity of the IMC certificate
- 2029-07-14
End of validity of the ISO 9001 certificate of the Swiss Certification Company AG