Hand electroplating from Nittendorf: galvanic finishing of gold, silver, nickel, copper, tin, chromium and anodising for individual parts and small series.
Fisch Edelmetallgalvanik GmbH
Nittendorf · Regensburg (place of founding)New on Amplifa
About Fisch Edelmetallgalvanik GmbH
Fisch Edelmetallgalvanik GmbH is a master-craft electroplating company based in Nittendorf near Regensburg, in operation since 1972. The company with around 10 employees specialises in hand electroplating and finishes steels and non-ferrous metals with galvanic coatings of gold (also hard gold alloyed with cobalt), silver, copper, bright nickel, electroless nickel, tin and chromium. In addition, blackening (browning) of steel parts, electropolishing of stainless steel and aluminium, and anodising of aluminium are offered. Individual parts and small series are processed, both as rack plating and in barrels. The coating systems serve electrical conductivity, corrosion and wear protection as well as decorative requirements. Customers come from mechanical engineering, the automotive industry, medical technology and electrical engineering/electronics, including well-known Regensburg companies such as Osram, Siemens, Infineon and Continental.
- Site
- Nittendorf
- Processes
- Electroplating (surface finishing), Gold coating, Silver coating, Copper coating, Bright nickel coating, Chromium coating, Tin coating, Electroless nickel coatings
- Materials
- Steel, Non-ferrous metals, Stainless steel, Aluminium, Gold / Hard Gold (cobalt-alloyed), Silver, Copper (cyanide-based), Bright Nickel
- Certificates
- Master-certified electroplating company
- Founded
- 1972
- Employees
- ca. 10
- Industries
- Mechanical engineering, Automotive industry, Medical technology, Electrical engineering/Electronics
- 01
Enquiry and planning
- 02
Development of the coating build-up
- 03
Pretreatment of the parts
- 04
Galvanic finishing (rack plating or barrel plating)
- 05
Post-treatment (e.g. tarnish protection)
- 06
Quality inspection and dispatch
Processes and Materials
Gold / Hard Gold (cobalt-alloyed)
Technical and decorative coatings for electronic components with good conductivity, solderability and corrosion resistance; max. 500 x 180 x 50 mm.
Silver
Haze-free coatings with 150–180 HV for electrical engineering and electronics, max. 600 x 380 x 200 mm, with tarnish-protection post-treatment.
Copper (cyanide-based)
Can be deposited directly on less noble base metals, high adhesion strength and good conductivity; max. 800 x 500 x 200 mm.
Bright Nickel
Dense, strongly adhering nickel coatings for decorative purposes and corrosion protection; max. 800 x 500 x 200 mm.
Electroless Nickel
Uniform coatings deposited without external current at 500 HV, particularly suitable for parts with fit dimensions; max. 700 x 300 x 300 mm.
Tin
Bright, solderable coatings for the electronics industry, wipe-resistant and physiologically safe; max. 700 x 400 x 150 mm.
Chromium
Hard, tarnish-resistant process with a silver-like shine for wear and corrosion protection; max. 600 x 300 x 200 mm.
Blackening (Browning)
Conversion of steel surfaces into a firmly adhering iron oxide layer from brownish to deep black; bath size 500 x 300 x 100 mm.
Electropolishing
Polishing of stainless steel and aluminium with high reflectivity, also suitable for profiled parts; max. 900 mm length.
Anodising (Anodic Oxidation)
Converts the aluminium surface into a dense, hard oxide layer with protection against corrosion and wear.
Locations
Nittendorf
DEProduction and Administration
- Lot size
- Individual parts and small series, rack plating and barrel plating
- Materials
- Steel, non-ferrous metals, stainless steel, aluminium
- Hand electroplating
- Gold bath (hard gold alloyed with cobalt)
- Silver bath for electronic components
- Cyanide copper bath
- Bright nickel bath
- Electroless nickel line
- Chromium bath
- Tin bath
- Blackening bath
- Electropolishing line
- Anodising line
Finished Components
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Electroplating (surface finishing)Surface | – | – | – | – | Steel, Non-ferrous metals, Fe, Niro, Aluminium, Stainless steel |
| Gold coatingSurface | – | 500mm × 180mm × 50mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Silver coatingSurface | 150 - 180 Vickers (HV) | 600mm × 380mm × 200mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Copper coatingSurface | – | 800mm × 500mm × 200mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Bright nickel coatingSurface | – | 800mm × 500mm × 200mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Chromium coatingSurface | – | 600mm × 300mm × 200mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Tin coatingSurface | – | 700mm × 400mm × 150mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| Electroless nickel coatingsSurface | 500HV (electroless nickel-phosphorus | 700mm × 300mm × 300mm | – | – | all non-ferrous metals, Fe, Niro, Aluminium |
| ElectropolishingSurface | – | 900mm × 400mm × 400mm | – | – | Stainless steel, Aluminium |
| Blackening (Browning)Surface | – | 500mm × 300mm × 100mm | – | – | Fe |
| AnodisingSurface | – | – | – | – | Aluminium |
1 Anlagen & Maschinen
| Machine | Manufacturer / model | Quantity | Working area | Year built | Site |
|---|---|---|---|---|---|
| Hand electroplating | Fisch Edelmetallgalvanik GmbH | 10 employ | – | 1972 | Nittendorf |
Additional services
Reference customers
Quality
As a master-certified company, the master craftsmen work with processes refined over many years. Quality, flexibility and adherence to delivery dates are the focus of production for individual parts and small series.
| Evidence | Nittendorf |
|---|---|
| Master-certified electroplating company |
History
- 1972
Foundation of the company in Regensburg
Location Nittendorf, Grafenrieder Weg 5