Development and manufacture of UV-C air disinfection devices for indoor spaces
PRO/CAIR GmbH
Baiern (Bavaria)New on Amplifa
About PRO/CAIR
PRO/CAIR is a company founded in 2022, based in Baiern in Bavaria, that develops and manufactures UV-C air disinfection technology for indoor spaces. The core product Procair-300 is installed as a ceiling-mounted unit and channels room air through an airflow- and radiation-optimized irradiation chamber in which microorganisms are inactivated by UV-C radiation; up to 99.9999% (6 log) inactivation has been biodosimetrically validated (Biotec GmbH / University of Stuttgart). The device integrates room lighting (4000 K), remotely controllable fan speeds, replaceable pre-filters and a sensor system for monitoring UV-C output, airflow, temperature, humidity and VOC. Target industries are medical technology, healthcare/patient protection and HVAC/air treatment. The unit weighs approximately 50 kg and is designed for rooms of up to approx. 30 m² at a ceiling height of 2.5 m. Procair was developed by Gerg Lighthouse and is distributed together with his development and manufacturing expertise.
- Site
- Baiern
- Processes
- UV-C air disinfection (Procair-300 air disinfection device, ceiling mounting, 99.9999% inactivation,, UV-C air disinfection technology (Procair-300), Integrated room lighting (4000 K), Remote control/fan speeds, Sensor-based monitoring (UV-C output, airflow, temperature/humidity, VOC), Installation consulting
- Materials
- UV-C irradiation technology, LED room lighting 4000 K, Sensor system, Replaceable pre-filters
- Certificates
- VDE certification (per DIN/TS 67506 etc.), Effectiveness verification (biodosimetry, up to 99.9999% inactivation / 6 log), VDE testing (DIN/TS 67506 exceeded), Biodosimetric validation (Biotec GmbH / University of Stuttgart), Development according to DIN EN 62471, DIN EN 60335-1/-2-65, VDI-EE 4300-14
- Founded
- 2022
- Employees
- 11–50
- Industries
- Medical technology, Healthcare/patient protection, HVAC/air treatment, Medical technology (manufacture of medical devices)
- 01
Development (UVC/CFD simulation)
- 02
Component selection
- 03
Assembly of the device
- 04
Sensor-based quality monitoring
- 05
Consulting and installation at the customer's site
Technology & Processes
UV-C irradiation technology
Inactivation of bacteria and viruses in aerosols through DNA damage, without UV-C emission or ozone formation in the room.
LED room lighting 4000 K
Direct and indirect lighting, integrated into the ceiling unit and remotely controllable and dimmable.
Sensor system
Monitors UV-C output, airflow, temperature/humidity and air quality (VOC) with automatic fan adjustment.
Replaceable pre-filters
Clean the incoming air before it enters the irradiation chamber and can be replaced easily for maintenance.
Locations
Baiern
DEHeadquarters
- Part weight / size
- approx. 50 kg (device)
- Materials
- UV-C technology, LED, sensor technology
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| UV-C air disinfection (Procair-300 air disinfection device, ceiling mounting, 99.9999% inactivation,Other | – | – | 50 kg (device weight) | – | – |
Additional services
Quality & Certification
Procair has been tested by the VDE and already exceeds the requirements of standard DIN/TS 67506 for UV-C air disinfection devices; its effectiveness has also been biodosimetrically validated by Biotec GmbH and the University of Stuttgart.
| Evidence | Baiern |
|---|---|
| VDE testing (DIN/TS 67506 exceeded) | |
| Biodosimetric validation (Biotec GmbH / University of Stuttgart) | |
| Development according to DIN EN 62471, DIN EN 60335-1/-2-65, VDI-EE 4300-14 |
History
- 2022
Founding of PRO/CAIR in Baiern (Bavaria) by Gerg Lighthouse
- 2023
VDE testing and biodosimetric validation (Biotec GmbH / University of Stuttgart) with 99.9999% inactivation (6 log)