Engineering office for development, design, testing technology as well as assembly, repair and vehicle diagnostics
W.ING. (Willmann-Ing.)
74379 Ingersheim, GermanyNew on Amplifa
About W.ING.
W.ING. (Willmann-Ing.) is a small, flexible engineering office in Ingersheim in Baden-Württemberg. Owner Tobias Willmann studied mechanical engineering with a focus on automotive engineering and worked in the automotive industry for several years, specializing in refrigerant circuits and vehicle air conditioning. The service portfolio covers development and design, creation of parametrized 3D models and technical drawings, calculations and validation tests as well as complete project management. In addition, the office carries out assembly and repair work, including structural steelwork with gas metal arc welding, timber construction, and maintenance of agricultural machinery and passenger cars. Another area is the diagnosis of technical problems on cars and agricultural machinery, including reading and programming of VAG vehicles with VCDS/OBD2, TÜV preparation and advice when buying a car. Reference projects include test rigs for an automotive supplier, a hail impact machine for the ITW of the University of Stuttgart, and a wood chip storage facility for a garden nursery.
- Site
- Ingersheim
- Processes
- Development and design, 3D models and technical drawings, Assembly and repairs, Gas metal arc welding (as part of steelwork work), Diagnostics and advice on technical problems with cars and agricultural machinery, Fault diagnostics using VCDS/OBD2 (reading and programming of VAG vehicles), Advice when buying a car, Development of a test rig for leak testing of pipe connection fittings (CO2 under high
- Materials
- Steel (structural steelwork), Steel
- Certificates
- ISO 9001
- Industries
- Automotive industry, Agricultural machinery, Agriculture/Garden nursery, Solar technology
- 01
Consulting and concept development
- 02
Calculation (e.g. variant calculation)
- 03
3D design and technical drawings
- 04
Construction or testing and validation
- 05
Assembly and commissioning
Materials and Processes
Steel
Used in structural steelwork including gas metal arc welding as part of assembly and repair work.
Locations
Ingersheim
DEEngineering office (development, design, diagnostics, assembly)
- Materials
- Steel
- VCDS readout software and diagnostic hardware (OBD2/VAG)
Components and Projects
Inside the production
Industries
Processes & technical limits
| Processes | Tolerance | Max. part | Weight | Lot size | Materials |
|---|---|---|---|---|---|
| Development and designEngineering | – | – | – | – | – |
| 3D models and technical drawingsEngineering | – | – | – | – | – |
| Assembly and repairsAssembly | – | – | – | – | – |
| Gas metal arc welding (as part of steelwork work)Joining | – | – | – | – | Steel |
| Diagnostics and advice on technical problems with cars and agricultural machineryTesting | – | – | – | – | – |
| Fault diagnostics using VCDS/OBD2 (reading and programming of VAG vehicles)Testing | – | – | – | – | – |
| Advice when buying a carEngineering | – | – | – | – | – |
| Development of a test rig for leak testing of pipe connection fittings (CO2 under highTesting | – | – | – | – | – |
| Concept development for test rig fixtures (actuation of center consoles in the vehicle test rig)Engineering | – | – | – | – | – |
| Development and construction of a hail impact machine for testing the hail resistance ofEngineering | – | – | – | – | – |
| Transmission design and calculation (shafts, bearings, gears, shaft-hub connections)Engineering | – | – | – | – | – |
Additional services
Reference customers
Quality
Concepts are validated through calculations (e.g. parameter-driven variant calculation) and tests; for test rig projects, measurement accuracy was calculated and suitable measuring instruments selected.
| Evidence | Ingersheim |
|---|---|
| ISO 9001 |
History
- 2005
Calculation and design of a multi-stage transmission during studies (design draft).
- 2006
Development and construction of a hail impact machine for testing the hail resistance of solar collectors for the ITW, University of Stuttgart.
- 2007
Development of a test rig for leak testing of fittings of CO2-charged pipes for an automotive supplier.
- 2007
Concept development of a device for actuating center console buttons in the vehicle test rig for an automotive supplier.
- 2009
Planning and construction of a wood chip storage facility (400 m³) incl. bunker for a garden nursery to heat 8000 m² of greenhouse area.
- 02/2011
Acquisition of the VCDS readout software and corresponding hardware for VAG vehicles (OBD2 diagnostics for many other brands).